Entering The System Management Mode - Canon imageCLASS 2200 Reference Manual

System Management Mode of the imageRUNNER
3300/2800/2200
The following pages regarding the use and operations of the System Manager mode, should
be cut out of this manual, and be stored by the supervisor or the system manager.
With this function, you can set restrictions to the System Settings of the Additional Functions,
and manage the contents of the settings stored by other users. This mode is call the System
Management mode.
The operations which can be done in the System Management mode are as follows:
• Box Document Management
• Box Setting Management

Entering the System Management Mode

When Department ID Management is Enabled
1
Enter the system manager ID for "Department ID," and the system
password for "Password" in the screen shown below with
The machine enters the System Management mode.
- (numeric keys). Then press
System Management Mode of the imageRUNNER 3300/2800/2200
(ID).
XVII