Setting The Time Taken For The Unit To Quiet Down After The Last Task - Canon imageCLASS 2200 Reference Manual

2
Enter the desired time period using "–" or "+," and press "OK."
The Auto Clear Time settings are from 0 to 9 minutes (in one-minute increments).
You can also enter values using
3
Press "Done."
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Setting the Time Taken for the Unit to Quiet Down After the
Last Task
This machine enters the Quiet mode after a specified amount of time has elapsed following a
print job or after a key has been pressed. On this screen you can specify the amount of time
that must be taken before entering the Quiet mode.
NOTE
•
The default setting is "1 minute."
1
Call up the desired screen as follows:
(Additional Functions)
- (numeric keys).
Time Until Unit Quiets Down
Setting the Timer (Timer Settings)
3
3-35