Department Id Management When Using The Control Card - Canon imageCLASS 2200 Reference Manual

µ

Department ID Management When Using the Control Card

This section describes how to change the password and Impression Limit, and how to check
the print totals, when the control card is being used.
NOTE
•
The maximum number of digits you can store for the password is seven. If you store them with less
than seven, the machine stores them as follows:
- Example: when <321> is entered → <0000321> is stored.
•
The maximum number of digits you can store for the Impression Limit is six.
•
The default setting is "Off."
Changing the Password and Impression Limit
1
Call up the desired screen as follows:
When the System Manager ID/Password is set, enter the System Manager ID and System
Password after pressing "System Settings." Then, press
2
Press "Store Dept. ID/Password."
(Additional Functions)
(ID).
Card Reader-C1 7-83
7