Operating The Foot Switch - Brother KE-434C Instruction Manual

5. OPERATION

5-3. Operating the foot switch

1st step
2nd step
1st step
2nd step
24
Start switch
Work clamp switch
Start switch
Work clamp switch
Single-pedal foot switch (two steps)
When the foot switch is depressed to step 1, the work clamp is
lowered, and when it is depressed to step 2, sewing starts.
0328Q
Two-pedal foot switch (one step + one step)
When the work clamp switch (left side) is depressed, the work
clamp is lowered, and when the start switch (right side) is
depressed, sewing starts.
0329Q
Two-pedal foot switch (two steps + one step)
* For pneumatic
When the work clamp switch (left side) is depressed to step 1,
the work clamp on one side is lowered, and when it is pressed
to step 2, the work clamps on both sides are lowered.
The work clamp lowering pattern can be set to a variety of
different patterns. (Refer to "14. SETTING THE WORK CLAMP
MODE".
When the start switch (right side) is depressed, sewing starts.
0330Q
KE-434C,435C