Operating The Foot Switch - Brother LK3-B434E MKII Instruction Manual

5. OPERATION

5-3. Operating the foot switch

1st step
2nd step
1st step
2nd step
23
Start switch
Work clamp switch
Start switch
Work clamp switch
LK3-B434E Mark II
Single-pedal foot switch (two steps)
When the foot switch is depressed to step 1, the work
clamp is lowered, and when it is depressed to step 2,
sewing starts.
Two-pedal foot switch (one step + one step)
When the work clamp switch (left side) is depressed,
the work clamp is lowered, and when the start switch
(right side) is depressed, sewing starts.
Two-pedal foot switch (two steps + one step)
* For pneumatic
When the work clamp switch (left side) is depressed
to step 1, the work clamp on one side is lowered,
and when it is pressed to step 2, the work clamps
on both sides are lowered.
* The work clamp lowering pattern can be set to a
variety of different patterns. (Refer to "14. SET-
TING THE WORK CLAMP MODE".
When the start switch (right side) is depressed,
sewing starts.