Brother KE-434C Instruction Manual page 47

Electronic lockstitch pattern tacker electronic lockstitch pattern tacker with stepping foot
Hide thumbs Also See for KE-434C:
Table of Contents

Advertisement

10-7-2. Adjusting the engagement of the movable knife and fixed knife
Cutting
edge
Cutting
edge
2949Q
A. After the movable knife and fixed knife are properly engaged, tighten the screw as shown in Fig. 1.
B. Turn the movable knife (in the direction of the arrow) while the screw is still tightened.
C. Loosen the screw.
D. Turn the movable knife (in the direction of the arrow) while the screw is still loosened.
Repeat above steps A , B, C and D four or five times to maintain the cutting performance of the knife.
Fig. 1
KE-434C,435C
10. STANDARD ADJUSTMENTS
Movable knife
Fixed knife
Cutting
edge
Cutting
edge
0149Q
0150Q
41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ke-435c

Table of Contents