Table of Contents
Advertisement
Paper does not feed from the optional paper cassette
Cause
The paper guides are not set correctly.
The optional paper cassette may not be installed
properly.
The paper source setting may not be correct.
There may be no paper in the paper cassette.
Too many sheets may be loaded in the paper cassette.
The paper size is not set correctly.
Feed jam when using the optional paper cassette
Cause
The paper is jammed at the optional paper cassette.
An installed option cannot be used
Cause
The installed option is not defined in the printer driver.
Correcting USB Problems
If you are having difficulty using printer with a USB connection, see if your problem is listed below,
and take any recommended actions.
EPSON AcuLaser M8000 Series
What to do
Make sure that the paper guides in the optional paper cassettes
are set to the correct paper size positions.
See "Optional Paper Cassette Unit" on page 108 for instructions
on installing an optional paper cassette unit.
Make sure you have selected the proper paper source in your
application.
Load paper into the selected paper source.
Make sure that you have not tried to load too many sheets of
paper. For the maximum paper capacity for each paper source,
see "MP tray" on page 30, "Standard lower paper cassette" on
page 33, and "Optional paper cassette unit" on page 38.
Make sure to set the paper guides in the optional paper cassette
correctly.
What to do
See "Clearing Jammed Paper" on page 156 to clear jammed paper.
What to do
For Windows users:
You have to make settings manually in the printer driver. See
"Making Optional Settings" on page 205.
User's Guide
Troubleshooting
196
Advertisement
Table of Contents
