Parallel Menu - Epson AcuLaser M8000 Series User Manual

Time Setting
Specifies the current date and time by entering them directly.
Date Format
Specifies the format to display the date.

Parallel Menu

These settings control communication between the printer and the computer when using the parallel
interface.
Item
*1
Parallel I/F
*1*2
Speed
*1*2
Bi-D
*1*2
Buffer Size
*1
After this item is changed, the setting value takes effect after a warm boot or after the power is turned on again. While
it is reflected in the Status Sheet and EJL read-back, the actual change takes effect after a warm boot or after the power
is turned on again.
*2
Available only when USB I/F is set to On.
Parallel I/F
Allows you to activate or deactivate the parallel interface.
Speed
Specifies the pulse width of the ACKNLG signal when receiving data in the Compatibility mode or
Nibble mode. When Fast is selected, the pulse width is about 1 μs. When Normal is selected, the
pulse width is about 10 μs.
Bi-D
Allows you to specify the bidirectional communication mode. When you select Off, bidirectional
communication is disabled.
Settings (default in bold)
On, Off
Fast, Normal
ECP, Off, Nibble
Normal, Maximum, Minimum
EPSON AcuLaser M8000 Series
Using the Control Panel
User's Guide
78