Epson AcuLaser M8000 Series User Manual page 74

EPSON AcuLaser M8000 Series User's Guide
Stacker
Specifies whether or not to output the paper to the face-down tray when the Stacker is full.
MP Mode
This setting determines whether the MP tray has the highest or lowest priority when Auto is selected
as the Paper Source setting in the printer driver. When Normal is selected as the MP Mode, the MP
tray has the highest priority as the paper source. If you select Last, the MP tray has the lowest priority.
Manual Feed
Allows you to select the manual feed mode for the MP tray.
Copies
Designates the number of copies to be printed, from 1 through 999.
Duplex
Turns duplex printing on or off. This allows you to print on both sides of a page.
Binding
Specifies the binding direction of the printout.
Start Page
Specifies whether duplex printing starts from the front or back of the page.
Paper Type
Specifies the type of paper to be used for printing. When Resolution is set to 600, the printer adjusts
the printing speed according to this setting. The printing speed is reduced when ExtraThk or
Transparency is selected.
Skip Blank Page
Enables you to skip blank pages when printing. This setting is available when you print in the ESC/
Page, ESCP2, FX, or I239X mode.
Auto Eject Page
Using the Control Panel 74