Removing A Memory Module - Epson AcuLaser M8000 Series User Manual

8. Tighten the screw on the back of the printer.
Warning:
w
Tighten the screw firmly to prevent the printer's right side cover from the falling off when
moving the printer.
9. Reconnect the interface cable and power cord and turn the printer on.
To confirm that the option is installed correctly, print a configuration status sheet. See "Printing a
Configuration Status Sheet" on page 184.
Note for Windows users:
If EPSON Status Monitor is not installed, you have to make settings manually in the printer driver. See
"Making Optional Settings" on page 205.

Removing a memory module

Warning:
w
Be careful when working inside the printer as some components are sharp and may cause injury.
Caution:
c
Before you remove a memory module, be sure to discharge any static electricity by touching a
grounded piece of metal. Otherwise, you may damage static-sensitive components.
Perform the installation procedure in reverse.
EPSON AcuLaser M8000 Series
Installing Options
User's Guide
137