Reassembly Process; Replacing The Lcd Module - Acer Aspire S3-391 Service Manual

Reassembly Process

Replacing the LCD Module

1. Tilt the LCD hinge approximately at a 45° angle then insert the upper case and align the
screw posts of the upper case with the screw holes in the LCD hinges.
Figure 3-66. Upper Case
2. Verify that the LCD cable is looped properly in the LCD hinge as shown.
Figure 3-67. Upper Case
+ IMPORTANT:
Make sure that the LCD cable is not entangled with the upper case and take
extra care not to scratch the LCD cable.
Machine Maintenance
0
0
3-43