Removing the Mainboard
1. Perform the
"Removing the Lower
2. Perform the
"Removing the Battery
3. Release the connector latch (1) from the mainboard, then disconnect the touchpad cable (2).
Figure 3-37. Touchpad Cable
4. Release the connector latches (1) from the mainboard, then disconnect the WLAN & mini
1 cables (2). Disconnect the power cable from the mainboard (3).
Figure 3-38. WLAN, Mini 1 & Power Cables
Machine Maintenance
Case" procedure described on page 3-9.
Pack" procedure described on page 3-10.
0
3-27