Removing the DC-In Module (M-SATA Board)
1. Perform the
"Removing the Lower
2. Perform the
"Removing the Battery
3. Disconnect the DC-In cable from the M-SATA board & the mainboard (1) then release the
DC-In cable from the self adhesive tape securing it (2).
Figure 3-20. DC-In Cable (M-SATA Board)
4. Detach the DC-In socket from the upper case.
Figure 3-21. DC-In
3-18
Case" procedure described on page 3-9.
Pack" procedure described on page 3-10.
0
Machine Maintenance