Removing the HDD Module
NOTE:
NOTE:
For models that have SSD disk drive installed, please proceed to page 3-22,
the SSD
Module".
1. Perform the
"Removing the Lower
2. Perform the
"Removing the Battery
3. Release the HDD cable from the adhesive tape securing it.
Figure 3-22. HDD Cable Adhesive Tape
4. Grasp the plastic tab and use it to disengage the HDD cable from its connector.
Figure 3-23. HDD Cable
Machine Maintenance
Case" procedure described on page 3-9.
Pack" procedure described on page 3-10.
0
"Removing
3-19