Setting A Password; Removing A Password - Acer Aspire S3-391 Service Manual

Setting a Password

Follow the succeeding instructions to set the user or supervisor passwords.
1. Press
_______ Password dialog box appears.
Figure 2-4. Set Supervisor Password
2. Type a new password in the Enter New Password field and press Enter. Passwords
are not case sensitive and the length must not exceed eight alphanumeric characters
(A-Z, a-z, 0-9).
3. Retype the password in the Confirm New Password field and press Enter.
+
IMPORTANT:
4. Press Enter.
NOTE:
NOTE:
Users can choose to enable the Password on Boot parameter.
5. Press F10 to save changes and exit from the BIOS Setup Utility.

Removing a Password

Perform the following:
1. Press
_______ Password dialog box appears.
Figure 2-5. Set Supervisor Password
2. Type the current password in the Enter Current Password field and press Enter.
3. Press Enter twice
New Password fields.
4. Press F10 to save changes and exit from the BIOS Setup Utility.
2-8
to highlight a Set _______ Password parameter and press Enter. The Set
Set Supervisor Password
Enter New Password
Confirm New Password [
Use care when typing a password. Characters do not appear on the screen.
to highlight a Set _______ Password parameter and press Enter. The Set
Set Supervisor Password
Enter Current Password [
Enter New Password [
Confirm New Password [
typing anything in the Enter New Password and Confirm
without
[ ]
]
]
]
]
0
0
System Utilities