LCD Module Reassembly Process
Replacing the WLAN Antenna
1. Place the AUX antenna (white-color) to the left and the MAIN antenna (black-color)
to the right on the LCD cover. Make sure that the edge of the antenna PCB is
properly seated and placed onto its compartment highlighted by a green rectangle as
shown in
Figure
2. Adhere the MAIN antenna and AUX antenna grounding foils in place
Figure 3-55. Replacing the WLAN Antenna
3. Route and secure the WLAN antenna cables to the cable guides
Figure 3-56. Replacing the WLAN Antenna
Machine Maintenance Procedures
3-55.
AUX
AUX
(Figure
MAIN
(Figure
3-56).
MAIN
0
0
3-55).
3-45