Removing the LCD Module
1. Perform the
"Removing the Lower
2. Perform the
"Removing the Battery
3. Perform the
"Removing the Left and Right
4. Perform the
"Removing the WLAN
5. Perform the
"Removing the DC-In Module (WLAN
page 3-17.
6. Perform the
"Removing the HDD
7. Perform the
"Removing the Card Reader
8. Perform the
"Removing the
9. Perform the
"Removing the
10. Perform the
"Removing the Power Button
11. Perform the
"Removing the Middle Cover
12. Tilt the upper case until it is approximately at a 45° angle with the LCD assembly.
Figure 3-63. Upper Case Assembly
Machine Maintenance
Case" procedure described on page 3-9.
Pack" procedure described on page 3-10.
Speakers" procedure described on page 3-13.
Module" procedure described on page 3-15.
Module" procedure described on page 3-19.
Board" procedure described on page 3-25.
Mainboard" procedure described on page 3-27.
Keyboard" procedure described on page 3-36.
Board" procedure described on page 3-38.
Assembly" procedure described on page 3-39.
Board)" procedure described on
0
3-41