(See Figs. 1A & 1 B)
Remove and discard the upper bolt on both sides of the
drawbar. Using the same holes, installthe shoulder bolts
supplied and tighten securely.
BOLTS AND INSTALL
Align support assembly pin with hole in drawbar and
hang assembly over the shoulder bolts.
Be sure support assembly is seated properly and secure
with retainer spring supplied.
NOTE: For ease of assembly, you may wish to obtain the
assistance of another person for mounting cover assembly
Position cover assembly on ground behind tractor as
Lift and rotate cover to align cover brackets with support
Slide cover assembly down onto the support tubes,