Tools Required For Assembly; Carton Contents; Parts Identification - Craftsman 917.249890 Owner's Manual

KNOW YOUR GRASS CATCHER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS
CATCH ER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly.
Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to
prevent injury to yourself and others. Save this manual for future reference.
The operation of any tractor can result in foreign objects thrown into the eyes,
which can result in severe eye damage. Always wear safety glasses or eye
shields before starting your tractor and while mowing. We recommend a wide
vision safety mask for over the spectacles or standard safety glasses.
UNPACKING INSTRUCTIONS
Remove all parts and packing materials from carton.
• Check carton contents against list. Besureall parts are
there.
CARTON CONTENTS:
(3) ContainerTops
(3) Container Bottoms
(1) Upper Chute
(1) LowerChute
(1) Support Assembly
(1) Cover Assembly
(2) Shoulder Bolts
(1) Retainer Spring
PARTS IDENTIFICATION
COVER
ASSEMBLY
TOOLS REQUIRED FOR ASSEMBLY
(t) 9/16" Wrench
SUPPORT
ASSEMBLY
SHOULDER
BOLTS
FULL
BAGGER
INDICATOR
CHUTE LATCH
UPPER CHUTE
GRASS
CATCHER
CONTAINERS
LOWER CHUTE
LOWER CHUTE
ATTACHING
STRAPS
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the tractor,
in the operator's position.
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:
• Depress clutch/brake pedal fully and set parking brake.
• Place gearshift/motion control lever in "NEUTRAL" position,
Place attachment clutch in "DISENGAGED" position,
Turn ignition key "OFF" and remove key.
• Make sure the blade and all moving parts have completely stopped.
• Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with
plug,
4