Installing The Automatic Document Feeder - Epson GT-10000+ Setup Manual

Installing the Automatic Document Feeder

Before installing the Automatic Document Feeder, be aware that:
❏ The Automatic Document Feeder is heavy, so you may need
❏ The Automatic Document Feeder is large, so you should clear
Follow the steps below to install the Automatic Document Feeder
on your EPSON scanner.
1. Make sure your scanner is turned off, and then unplug the
2. Remove the scanner's document cover by holding the cover
3. Remove the document guide strip from the document table.
4. Attach the two feet as shown below.
Downloaded from:
to have someone help you lift it.
sufficient space around the scanner.
scanner's power cord.
behind the hinge and lifting the back of the cover straight up.
(See "Removing the Cover for Thick or Large Documents" on
page 4-5.)
http://www.usersmanualguide.com/
6-3
Options
6