Installing The Automatic Document Feeder - Epson GT-7000 Photo User Manual

Installing the Automatic Document Feeder

Follow the steps below to install the Automatic Document Feeder
on your EPSON scanner.
1. Make sure your scanner is turned off, and unplug the
scanner's power cord.
2. Remove your scanner's document cover by lifting the back
straight up. (See page 2-7)
3. Remove the protective materials from the Automatic
Document Feeder.
4. Insert the hinges on the Automatic Document Feeder into the
holes at the back of the scanner and close the Automatic
Document Feeder.
3-13
Options
3