Printing On Letterhead - Tektronix PHASER 380 User Manual

Printing Basics
3

Printing on letterhead

Phaser 380 Color Printer
3-38
Letterhead must be loaded face up in the media tray with the bottom edge of
the page closest to the media tray handle. Set the media selector switch on
the side of the printer to Paper. A label inside the media tray indicates the
trayÕs maximum paper capacity, approximately 250 sheets.
Some letterhead may be printed using ink that will offset onto
Caution
printer internal parts during printing, requiring you to
perform cleaning procedures. Run several test sheets of
letterhead to check for letterhead smearing before attempting a
large print job.
9662-21