Description Of Each Menu; Wall Color; Aspect Ratio; Auto Keystone - BenQ W703D User Manual

Digital projector
Hide thumbs Also See for W703D:
Table of Contents

Advertisement

Description of each menu

FUNCTION

Wall Color

Aspect Ratio

Auto
Keystone
Keystone
Position
Phase
H. Size

Digital Zoom

3D
DESCRIPTION
Corrects the projected picture's color when the projection surface is
not white. See
"Using Wall Color" on page 38
There are four options to set the image's aspect ratio depending on
your input signal source. See
details.
Corrects any keystoning of the image automatically. See
keystone" on page 32
for details.
Corrects any keystoning of the image manually. See
keystone" on page 32
for details.
Displays the position adjustment page. To move the projected image,
use the directional arrow keys. The values shown on the lower position
of the page change with every key press you made until they reach
their maximum or minimum.
This function is only available when a PC signal (analog RGB) is
selected.
Adjusts the clock phase to reduce image
distortion.
This function is only available when a PC signal
(analog RGB) is selected.
Adjusts the horizontal width of the image.
This function is only available when a PC signal (analog RGB) is
selected.
Magnifies or reduces the projected image. See
searching for details" on page 33
3D Direct Sync
Enable 3D function.
3D Format
HDMI: Support Frame Sequential / Frame Packing / Top-Bottom /
Side-by-Side.
Non HDMI: Frame Sequential / Top-Bottom.
See
"Setting the 3D Direct Sync Function" on page 35
2D to 3D
Change a 2D image to 3D. See
for details.
2D to 3D Deep
Make projected images appear in 3D, closer or farther way. See
2D to 3D Deep" on page 34
2D to 3D Curve
To adjust the perspective projection level use the 2D to 3D Curve
function. See
"Using 2D to 3D Curve" on page 34
3D Sync Invert
Invert 3D sync for the right eye and left eye. See
Invert Function" on page 35
for details.
"Selecting the aspect ratio" on page 36
"Magnifying and
for details.
"Switching from 2D to 3D" on page 34
for details.
for details.
"Setting the 3D Sync
for details.
for
"Correcting
"Correcting
for details.
"Using
Operation
49

Advertisement

Table of Contents
loading

Table of Contents