Table of Contents
Advertisement
Fine-tuning the image size and clarity
1.
Adjust the projected image to the size that
you need using the ZOOM ring.
2.
Then sharpen the image by rotating the
FOCUS ring.
Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either the
top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, besides adjusting the height of the projector, you can use Auto Keystone or
Keystone manually correct it following one of these steps.
•
Using Auto Keystone
It can correct Keystone to optimal status by automatically.
•
Using the remote control
1.
Press MENU/EXIT and then press
2.
Press
Keystone function.
3.
Press
control to display the Keystone correction
page. Press
the top of the image. Press
keystoning at the bottom of the image.
•
Using the OSD menu
1.
Press MENU/EXIT and then press
until the
2.
Press
press
Keystone function.
3.
Press MENU/EXIT and then press
until the
4.
Press
page displays.
32
Operation
to highlight Auto Keystone and press
/
on the projector or remote
to correct keystoning at
to correct
DISPLAY
menu is highlighted.
to highlight Auto Keystone and
/
to select Off to disable Auto
DISPLAY
menu is highlighted.
to highlight Keystone and press MODE/ENTER. The Keystone correction
DISPLAY
/
until the
/
to select Off to disable Auto
/
/ .
Press
/
FOCU S
FOCUS
menu is highlighted.
/ .
Press
Advertisement
Table of Contents
