Hiding The Image; Remote Receiver; Freezing The Image - BenQ W703D User Manual

Digital projector
Hide thumbs Also See for W703D:
Table of Contents

Advertisement

8.
Make sure you have made all of the desired adjustments.
9.
Press MENU/EXIT to exit and save the settings.
Saturation is the amount of that color in a video picture. Lower settings produce less
saturated colors; a setting of "0" removes that color from the image entirely. If the saturation
is too high, that color will be overpowering and unrealistic.

Hiding the image

In order to draw the audience's full attention
to the presenter, you can use BLANK on the
projector or remote control to hide the
screen image. Press any key on the projector
or remote control to restore the image. The
word 'BLANK' appears at the lower right
corner of the screen while the image is
hidden.
You can set the blank time in the
SETUP: Basic > Operating Settings >
Blank Timer
when there is no action taken on the blank screen.
No matter
Blank Timer
ENTER on the remote control, or ENTER on the projector to restore the picture.
Do not block the projection lens from projecting as this could cause the blocking object to
become heated and deformed or even cause a fire.

Remote Receiver

The Infrared Remote Receiver (Front and Top)
allows the projector to accept signals from the
remote control. For best results, be sure to aim the
control toward the sensor without any obstructions
between the two, and at a distance no greater than 7
meters.
You can set the remote receiver in the
SETUP: Basic > Remote Receiver

Freezing the image

Press FREEZE on the remote control to freeze the image. The word
'FREEZE' will display in the upper left corner of the screen. To release the
function, press any key on the projector or remote control.
Even if an image is frozen on the screen, the pictures are running on the
video or other device. If the connected devices have active audio output,
you will still hear the audio even though the image is frozen on screen.
42
Operation
SYSTEM
menu to let the projector return the image automatically after a period of time
is activated or disabled, you can press any key except PAGE
menu.
SYSTEM
/
,

Advertisement

Table of Contents
loading

Table of Contents