Table of Contents
Advertisement
16.
3D INVERT
Set 3D Sync Invert to Disable or Invert.
17.
POWER OFF
Turns off the projector. See
down the projector" on page 45
18.
S-VIDEO
Displays the S-VIDEO source selection.
See
"Switching input signal" on page 30
details.
19.
PC
Displays the PC source selection. See
"Switching input signal" on page 30
details.
20.
HDMI 2
Displays the HDMI 2 source selection. See
"Switching input signal" on page 30
details.
21.
Right cursor/Increase volume level
(
/
)
: Navigates and changes settings in the
OSD. See
26
for details.
: Increase Volume.
22.
Down cursor/Keystone (
: Navigates and changes settings in the
OSD. See
26
for details.
: Manually corrects distorted images
resulting from an angled projection.
See
"Correcting keystone" on page 32
for details.
12
Introduction
"Shutting
for details.
for
for
"Using the menus" on page
/
)
"Using the menus" on page
23.
ASPECT
Select the display aspect ratios. See
"Selecting the aspect ratio" on page 36
details.
24.
FREEZE
Freeze/unfreezes the on-screen picture.
See
"Freezing the image" on page 42
details.
for
25.
AUTO
Automatically determines the best picture
timings for the displayed image.
26.
CONTRAST
Displays the CONTRAST setting bar. See
"Adjusting Contrast" on page 40
details.
27.
SHARP
Displays the SHARPNESS setting bar. See
"Adjusting Sharpness" on page 40
details.
28.
BLANK
Hides the screen picture. See
image" on page 42
29.
TINT
Displays the TINT setting bar. See
"Adjusting Tint" on page 40
30.
TEST
Displays the test pattern.
for
for
for
for
"Hiding the
for details.
for details.
Advertisement
Table of Contents
