Picture Mode; Brilliant Color; Color Temperature - BenQ W703D User Manual

Picture Mode

Reference
Mode
Brightness
Contrast
Color
Tint
Sharpness

Brilliant Color

Color
Temperature
3D Color
Management
Save Settings
Quick Auto
Search
Color Space
Conversion
50 Operation
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type.
See "Selecting a picture mode" on page 38
Selects a picture mode that most suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below.
See "Setting the User 1/User 2 mode" on page 39
3 mode" on page 39 for detail.
Adjusts the brightness of the image.
See "Adjusting Brightness" on page 39
Adjusts the degree of difference between dark and light in the image.
See "Adjusting Contrast" on page 40
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 40
The function is only available when Video or S-Video with NTSC
system is selected.
Adjusts the red and green color tones of the image.
See "Adjusting Tint" on page 40
The function is only available when Video or S-Video with NTSC
system is selected.
Adjusts the image to make it look sharper or softer.
See "Adjusting Sharpness" on page 40
The function is only available when Video or S-Video with NTSC
system is selected.
Adjusts white peaking while maintaining correct color presentation.
See "Adjusting Brilliant Color" on page 40
See "Selecting a Color Temperature" on page 40
See "3D Color Management" on page 41
Saves the settings made for User 1/User 2 or User 3 mode.
See "Setting the User 1/User 2 mode" on page 39
3 mode" on page 39 for details.
See "Switching input signal" on page 30
See "Changing Color Space" on page 30
for details.
and "Setting the User
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.
and "Setting the User
for details.
for details.