Table of Contents
Advertisement
Utilizing the password function
For security purposes and to help prevent unauthorized use, the projector includes an
option for setting up password security. The password can be set through the On-Screen
Display (OSD) menu. For details of the OSD menu operation, please refer to
menus" on page
26.
You will be inconvenienced if you activate the power-on lock functionality and subsequently
forget the password. Print out this manual (if necessary) and write the password you used in
this manual, and keep the manual in a safe place for later recall.
Setting a password
Once a password has been set, the projector cannot be used unless the correct password is
entered every time the projector is started.
Once a password has been set and the splash screen lock is activated, you cannot change the
splash screen that displays at projector startup unless the correct password is entered.
1.
Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security Settings
menu. Press MODE/ENTER. The Security Settings page displays.
2.
Highlight Power on Lock and select On by pressing
3.
As pictured to the right, the four arrow keys (
,
,
3, 4). According to the password you desire to
set, press the arrow keys to enter five digits for
the password.
4.
Confirm the new password by re-entering the
new password.
Once the password is set, the OSD menu returns
to the Security Settings page.
5.
To activate the Power on Lock function, press
press
/
The digits being input will display as asterisks on-screen. Write your selected password down
here in this manual in advance or right after the password is entered so that it is available to
you should you ever forget it.
Password: __ __ __ __ __
Keep this manual in a safe place.
6.
To leave the OSD menu, press MENU/EXIT.
) respectively represent 4 digits (1, 2,
to select On.
"Using the
/
.
,
INPUT NEW PASSWORD
/
to highlight Power on Lock and
Operation
Back
MENU
27
Advertisement
Table of Contents
