Table of Contents
Advertisement
FUNCTION
DESCRIPTION
Sets the language for the On-Screen Display (OSD) menus.
Language
See
The projector can be installed on a ceiling or behind a screen, or with
Projector
one or more mirrors.
Position
See
Menu display time
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Menu
Menu position
Settings
Sets the On-Screen Display (OSD) menu position.
Reminder Message
Selecting On allows the projector to remind you to clean the filter.
Direct Power On
Powers projector on automatically when the power cable is connected.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time.
See
Quick Cooling
Enables or disables the Quick Cooling function.
Selecting On enables the function and the projector cooling time will
be shortened from a normal 90 second duration to approximately 2
Operation
seconds.
Settings
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen.
See
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value between
30 minutes and 12 hours.
Sets the preferred remote receiver (Front and Top) allowing the
Remote
projector to accept signals from the remote control.
Receiver
Selects background appearance when there is no signal.
Background
Color
Allows you to select which logo screen will display during projector
Splash
start-up. Four options are available: BenQ logo, Black screen, Blue
Screen
screen.
"Using the menus" on page 26
"Choosing a location" on page 15
"Setting Auto Power Off " on page 55
If you attempt to restart the projector right after the quick
cooling process, it may not be turned on successfully and will
rerun its cooling fans.
"Hiding the image" on page 42
for details.
for details.
for details.
for details.
Operation
51
Advertisement
Table of Contents
