Table of Contents
Advertisement
MAKING EXPOSURE SETTINGS
You can adjust exposure to help control how much light falls on the CCD.
It influences the brightness of the entire image. You usually don't need to
make manual adjustments, but it is possible to increase ＋ or decrease − the
exposure to suit a particular purpose.
It is recommended that these adjustments be used when shooting against
the sun or when you have any very bright background where the automatic
sensors may not work well.
Press the MENU button and use the
ADJUSTMENT.
Select the adjustment value using
the ▲▼ buttons.
Effects of Exposure Adjustment
− 2.0EV
The exposure adjustment range is from − 2.0 EV to ＋ 2.0 EV during programmed shooting.
There are 9 steps of 0.5 EV each. You can confirm the setting on the Display Panel of the
LCD monitor. (See page 22.42) You can also set the number while shooting through the
VIEWFINDER.
58
ADJUSTMENTS
Turn the DIAL SWITCH to PHOTO MODE and
then turn the POWER ON.
buttons to select EXPOSURE
± 0EV
＋ 2.0EV
Advertisement
Table of Contents
