Table of Contents
Advertisement
Switching on/off
Connecting the power cord
Use the supplied power cord to prevent removal of the power cord and make sure that it is fully inserted
into the projector.
Confirm that the <MAIN POWER> switch is on the <OFF> side before connecting the power cord.
For detailed power cord handling, refer to "Read this first!" (
■ Attaching
▶
1) Check the shapes of the <AC IN> terminal on the back side of the projector and the
power cord connector and fully insert until the tabs on the left and right make a click
sound.
2) Connect the power plug to an outlet.
■ Removing
▶
1) Confirm that the <MAIN POWER> switch is on the <OFF> side and unplug the power
cord from the outlet.
2) Remove the plug from the <AC IN> terminal while pushing on the tabs on the sides.
Switching on/off
pages 2 to 10).
ENGLISH - 35
Advertisement
Table of Contents
