[Test Pattern]; [Initialize All] - Panasonic PT-LZ370U Operating Instructions Manual

Operating instructions
Hide thumbs Also See for PT-LZ370U:
Table of Contents

Advertisement

[PROJECTOR SETUP] menu

[TEST PATTERN]

Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not
be reflected in test patterns. Make sure to display the
input signal before performing various adjustments.
1) Press ▲▼ to select [TEST PATTERN].
2) Press the <ENTER> button.
z The test pattern is displayed.
3) Press ◀▶ to switch the various test
patterns.
z Press the <MENU> button or the <RETURN>
button to return to the sub-menu of
[PROJECTOR SETUP].
■ To display sequence of internal
test patterns
The setting will change as follows each time you
press ◀▶ .
All white
Horizontal lines
Vertical lines
Dots
74 - ENGLISH
Color bars
White cross on black background
Black cross on white background
Cross hatch
Note
z The default screen is all white. If you assign this to
the <FUNC1> to <FUNC3> buttons, Cross hatch
becomes the default.

[INITIALIZE ALL]

You can return various setting values to the factory
default settings.
When you perform this function, the projector enters
standby mode to initialize.
1) Press ▲▼ to select [INITIALIZE ALL].
2) Press the <ENTER> button.
z [INITIALIZE ALL] is displayed.
z Password entry is required if you have set [ON]
in the [SECURITY] menu → [PASSWORD]
(
page 75).
3) Press ◀▶ to select [OK].
4) Press the <ENTER> button.
z The [NOW INITIALIZING...] screen appears,
and is followed by [POWER OFF.].
5) Press the <ENTER> button.
z Key operations other than the <ENTER> button
and the power
this time.
6) Wait until the power indicator <ON
(G)/STANDBY (R)> of the projector
illuminates or flashes red (the fan
stops).
7) Press the <OFF> side of the <MAIN
POWER> switch to turn off the power.
z The initial setting screen appears the next time
the projector is started. (
Note
z The projector usage time, lamp usage time, and
[NETWORK] settings are not initialized.
z After performing initialization, the password is
returned to its factory default and [PASSWORD] is
set to [OFF].
button are unavailable at
page 20)

Advertisement

Table of Contents
loading

Table of Contents