Table of Contents
Advertisement
[NETWORK] menu
■ [Ping test] page
▶
You can check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up] → [Ping test].
■ [ECO management set up] page
▶
You can configure the settings regarding ECO management.
You can also configure the settings with [PROJECTOR SETUP] → [LAMP POWER], [PROJECTOR SETUP]
→ [ECO MANAGEMENT] → [AUTO POWER SAVE], [PROJECTOR SETUP] → [ECO MANAGEMENT] → [NO
SIGNAL SHUT-OFF] of the projector.
Click [Detailed set up] → [ECO management set up].
88 - ENGLISH
(1) [Input IP address]
Enter the IP address of the server to be tested.
(2) [Submit]
Executes the connection test.
(1)
(2)
(3) Example of display when the connection has succeeded
(4) Example of display when the connection has failed
(3)
(4)
(1) [LAMP POWER]
Displays the setting of the lamp power.
(2) [AUTO POWER SAVE]
Selects the auto power save function.
(3) [AMBIENT LIGHT DETECTION]
Selects the setting of ambient light detection.
(1)
(4) [SIGNAL DETECTION]
(2)
Selects the setting of signal detection.
(3)
(5) [AV MUTE DETECTION]
(4)
Selects the setting of AV mute detection.
(5)
(6) [NO SIGNAL SHUT-OFF]
(6)
Selects the setting of No signal shut-off function.
(7)
(7) [Submit]
Update the settings.
Advertisement
Table of Contents
