Table of Contents
Advertisement
■ [Command port set up] page
▶
Set the port number used for command control.
Click [Detailed set up] → [Command port set up].
■ [Change password] page
▶
Click [Change password].
z [Administrator] account
(1) [COMMAND PORT]
Set the port number used for command control.
(2) [Set command port]
Update the settings.
(1)
(2)
(1) [Administrator]
Used to change the setting of [Administrator].
(2) [User]
Used to change the setting of [User].
(3) [Next]
Used to change the setting of the password.
(1)
(2)
(3)
(1) [Account]
Displays the account to change.
(2) [Current] [User name]
Enter the user name before the change.
(1)
(3) [Current] [Password]
Enter the current password.
(2)
(4) [New] [User name]
(3)
Enter the desired new user name. (Up to 16 characters in
(4)
single byte)
(5)
(5) [New] [Password]
(6)
Enter the desired new password. (Up to 16 characters in
single byte)
(7)
(6) [New] [Password(Retype)]
Enter the desired new password again.
(7) [OK]
Determines the change of password.
[NETWORK] menu
ENGLISH - 93
Advertisement
Table of Contents
