Table of Contents
Advertisement
Network settings of computer
Configure the network settings (wired LAN) of the computer.
1) Turn on the power of your computer.
2) Follow the network administrator's instructions to configure the network settings.
▶
z If the projector is in the default settings (
Accessing from the Web browser
1) Start up the Web browser on the computer.
2) Enter the IP address set on the projector into the URL entry field of the Web browser.
3) Enter the user name and the password.
▶
z The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the
password is panasonic (lower case).
4) Click OK.
▶
z The [Projector status] page is displayed.
page 78), make the following network settings on your computer.
IP address
192.168.10.100
Subnet mask
255.255.255.0
Default gateway
192.168.10.1
[NETWORK] menu
ENGLISH - 81
Advertisement
Table of Contents
