Table of Contents
Advertisement
[POSITION] menu
[POSITION] menu
Select [POSITION] from the main menu, and
select the item from the sub-menu.
Refer to "Navigating through the menu"
(
page 44) for the operation of the menu
screen.
z After selecting the item, press ▲▼◀▶ to set.
[KEYSTONE]
You can correct the trapezoidal distortion that occurs
when the projector is installed tilted or when the
screen is tilted.
1) Press ▲▼ to select [KEYSTONE].
2) Press ◀▶ or press the <ENTER>
button.
▶
z The [KEYSTONE] individual adjustment screen
is displayed.
3) Press ▲▼◀▶ to correct the
distortion.
Operation
Press ▲ or ▶ .
Press ▼ or ◀ .
z Setting range: - 32 to +32
Note
z You can correct the distortion ±30° from the vertical
plane. However, the picture quality will degrade
and it will get harder to focus with more correction.
Install the projector so the correction will be as
small as possible.
z Image size will also change when [KEYSTONE] is
performed.
z Trapezoidal distortion may occur depending on the
lens shift position.
z Aspect ratio of the image size may shift depending
on the correction or lens zoom value.
56 - ENGLISH
Adjustment
[SHIFT]
You can move the image position vertically or
horizontally if the image position projected on the
screen is shifted even when the relative position of the
projector and the screen is installed correctly.
1) Press ▲▼ to select [SHIFT].
2) Press the <ENTER> button.
▶
z The [SHIFT] individual adjustment screen is
displayed.
3) Press ▲▼◀▶ to adjust the position.
Note
z You can also press ▲▼◀▶ directly to operate this
function.
■ For vertical (up and down)
▶
adjustment
Operation
The picture
Press ▲ .
position moves
up.
The picture
Press ▼ .
position moves
down.
■ For horizontal (right and left)
▶
adjustment
Operation
The picture
Press ▶ .
position moves to
the right.
The picture
Press ◀ .
position moves to
the left.
Adjustment
Adjustment
Advertisement
Table of Contents
