Table of Contents
Advertisement
[SECURITY] menu
Select [SECURITY] from the main menu, and
select the item from the sub-menu.
Refer to "Navigating through the menu"
(
page 44) for the operation of the menu
screen.
z When the projector is used for the first time
Initial password: Press ▲▶▼◀▲▶▼◀ in
order, and press the <ENTER> button.
z After selecting the item, press ▲▼◀▶ to set.
Attention
z Make the settings after displaying the [SECURITY]
screen.
z When the [SECURITY] screen is displayed,
entering a password is required. Enter the set
password and then continue operations.
z When the password has been changed previously,
enter the changed password, and press the
<ENTER> button.
Note
z The entered password is displayed with * mark on
the screen.
[PASSWORD]
You can set to display the security password entry
screen when the projection starts. If the correct
password is not entered, any operation other than the
power
button operations becomes unavailable.
1) Press ▲▼ to select [PASSWORD].
2) Press ◀▶ to switch [PASSWORD].
▶
z The setting will change as follows each time
you press the button.
[OFF]
Disables the security password
[OFF]
entry.
Enables the security password
[ON]
entry.
Note
z The [PASSWORD] is set to [OFF] by default and
after you perform initialization.
z Change the password periodically that is hard to
guess.
z The security password will be enabled after setting
[PASSWORD] to [ON] and turning off the power
(standby mode).
[PASSWORD CHANGE]
You can change the security password.
1) Press ▲▼ to select [PASSWORD
CHANGE].
2) Press the <ENTER> button.
▶
z The [PASSWORD CHANGE] screen is
displayed.
3) Press ▲▼◀▶ and number (<1> - <6>)
buttons to set the password.
▶
z Up to eight button operations can be set.
4) Press the <ENTER> button.
5) Re-enter the password for the
confirmation.
6) Press the <ENTER> button.
Note
z The entered password is displayed with * mark on
the screen.
z An error message is displayed on the screen when
the entered password is incorrect. Re-enter the
correct password.
z When numerals are used in the security password,
initialization of the security password will be
necessary if the remote control is lost. For the
method of initialization, consult your dealer.
[ON]
[SECURITY] menu
ENGLISH - 75
Advertisement
Table of Contents
