Table of Contents
Advertisement
AUTO PC adjust
AUTO PC adjust
Select [PC adjust] from the Main Menu (see
"Navigating through the menu" on page 35),
then select the item from the sub-menu.
Remote Control
Auto PC adj.
Auto PC adjustment function is provided to
automatically adjust Fine sync, Total dots, Horizontal
and Vertical positions to conform to your computer.
Press ▲▼ to select [Auto PC adj.] and
then press the <ENTER> button.
Please wait...
z
adjustment is in process.
To store adjustment parameters
The adjusted parameters from the Auto PC adjustment
can be stored in the projector. Once the parameters
are stored, the setting can be done just by selecting a
Mode (1–10) in the System Menu (see page 38). See
also [Store] on page 42.
Attention
[Fine sync], [Total dots], [Horizontal] and [Vertical]
z
position of some computers cannot be fully adjusted
with the Auto PC adjustment function. When the image
is not provided properly with this operation, manual
adjustments are required (
The Auto PC adjustment cannot be operated when [480i],
z
[576i], [480p], [576p], [720p], [1035i] or [1080i] is selected
in the System Menu (
coming from the HDMI IN terminal.
40
- ENGLISH
Control Panel
appears while the Auto PC
Æ
pages 41-42).
Æ
page 38), or when the signal is
Advertisement
Chapters
Table of Contents
