Cutting Panels - Craftsman 113.241680 Owner's Manual

Feedthe workpiece by handalongtheAUXILIARY
FENCE untilthe endis approx.1 in. pastthe front
edgeof thetable.Continue tofeedusingthe PUSH
BLOCK.
Holdtheworkpiece in positionandinstall t he PUSH
BLOCK by sliding it on top of the AUXILIARY
FENCE/WORK SUPPORT (ThisMayRaise Guard).
Narrow stripsthickerthantheAuxiliaryFence/Work
Supportmayenterthe guardandstrikethe baffle.
CAREFULLY raiseguardonlyenough to clearthe
workpiece. U sePUSH BLOCKto complete cut.
BAFFLE
AUXILIARY FENCEr
WORK SUPPORT
CUTTING PANELS
When cutting panels (whenever fence is positioned
outside of table surface), ALWAYS use the
AUXILIARY FENCE/WORK SUPPORT.
1. Unlock fence and raise rear end.
2. Position AUXILIARY FENCE/WORK SUPPORT
as shown and attach it with two "C" clamps. . J"
/
35