Table of Contents
Advertisement
1 COMPOSITION OF
DEVELOPMENT SUPPORT TOOL
Here we will explain the composition of the software for the development support tools, develop-
mental envilonment and how to generate the execution disk.
1.1 Configuration of DEV6011
The below software are included in the product of the E0C6011 development support tool DEV6011.
1. Cross Assembler ASM6011 .......................................... Cross assembler for program preparation
2. Function Option Generator FOG6011 ........................... Function option data preparation program
3. Segment Option Generator SOG6011 .......................... Segment option data preparation program
4. ICE Control Software ICS6011 ...................................... ICE control program
5. Mask Data Checker MDC6011 ...................................... Mask data preparation program
1.2 Developmental Environment
The software product of the development support tool DEV6011 operates on the following host systems:
• IBM PC/AT (at least PC-DOS Ver. 2.0)
• NEC PC-9801 Series (at least MS-DOS Ver. 3.1)
When developing the E0C6011, the above-mentioned host computer, editor, P-ROM writer, printer, etc.
must be prepared by the user in addition to the development tool which is normally supported by Seiko
Epson.
Host computer
[
PC-9801 Series
IBM PC/AT
MS-DOS/PC-DOS
Editor
• P-ROM writer
• Printer
Note The DEV6011 system requires a host computer with a RAM capacity of about 140K bytes.
Since the ICE62R (ICE6200) is connected to the host computer with a RS-232C serial interface,
adapter board for asynchronous communication will be required depending on the host computer
used.
E0C6011 DEVELOPMENT TOOL MANUAL
]
E0C6011 Series Development Tool
ICE62R (ICE6200)
RS-232C
ICE6200
To be prepared by the user
Fig. 1.2.1 System configuration
EPSON
1 COMPOSITION OF DEVELOPMENT SUPPORT TOOL
EVA6011
Target board
1
Advertisement
Table of Contents
