Registration Roll Removal - Lexmark Optra C710 Service Manual

5016-001

Registration Roll Removal

1. Remove all covers, refer to the
page 4-2.
2. Remove the LVPS assembly, refer to the
Removal" on page
3. Remove the C-clip and the shaft bearing from the left side of the
registration roll.
4. Unlatch the cable cover bracket.
5. Loosen the registration roll from the left side.
6. Remove the two (2) screws from the paper A guide and remove
the guide.
7. Remove the white clip from the right side of the registration roll
shaft.
8. Remove the clutch magnet.
9. Remove the second C-clip from the registration roll shaft.
"Cover Removals" on
4-10.
"LVPS Assembly
Repair Information
4-27