Chapter 2 Eternus Dx Disk Storage System Installation; Installation Specifications; Eternus Dx60 S2; Table 2.1 Eternus Dx60 S2 Installation Specifications - Fujitsu ETERNUS DX60 S2 User Manual

Chapter 2
This chapter explains the installation of the ETERNUS DX Disk storage system.
2.1

Installation Specifications

2.1.1

ETERNUS DX60 S2

The following table shows the specifications of the ETERNUS DX60 S2.
Table 2.1
Dimensions
(W × D × H)
Maximum
weight (*2)
Service area
Power
ETERNUS DX60 S2 Disk storage system User's Guide -Site Planning-
ETERNUS DX Disk Storage System
Installation
ETERNUS DX60 S2 installation specifications
Item
Controller enclosure
Drive enclosure
Power
distribution
unit
Controller enclosure
Drive enclosure
Power
distribution
unit
Voltage
Phase
Frequency
Number of power supply units
Plug type
Copyright 2012 FUJITSU LIMITED
2.5" disk configuration
483 × 650 × 88mm
(2U)
435 × 148 × 38mm
1U
2U (485 × 280 × 43mm) × 2 (*1)
35kg
35kg
1U 2kg
2U (6kg) × 2 (*1)
Front: 800mm, Rear: 800mm
AC 100 – 120V, AC 200 – 240V
Single
50Hz/60Hz
2 (for each enclosure)
For AC200V connections:
EMEA&I region
IEC60320-C14G (supplied as standard)
For AC200V connections:
Regions other NEMA L6-15P (supplied as standard)
than EMEA&I For AC100V/AC200V connections:
IEC60320-C14 (optional)
26
ETERNUS DX60 S2
3.5" disk configuration
483 × 650 × 88mm
(2U)
483 × 650 × 88mm
—
(2U)
P3AM-5492-04ENZ0