Disk Installation Examples; Figure 4.3 Installation Diagram For 3.5" Disks - Fujitsu ETERNUS DX60 S2 User Manual

Chapter 4 Rack and Optional Product Installation
4.3 Standard Installation Rules Before Shipment (Only for Regions Other than EMEA&I)
Priority order
Up to twelve 3.5" disks can be installed in a controller enclosure (3.5" type) or a drive enclosure.
Disks with different types can be installed in a single enclosure.
Install disks in the slots of a controller enclosure from Slot#0 to Slot#11 in ascending order
according to the installation order in
from Slot#0 to Slot#11 in ascending order.
Figure 4.3
4.3.3

Disk Installation Examples

This section provides examples of disk installation at shipment.
■
2.5" type controller enclosure
Up to twenty-four 2.5" disks can be installed in a controller enclosure.
When optional disks are purchased at the same time as the ETERNUS DX Disk storage system,
the ETERNUS DX Disk storage system is shipped from the factory with the disks installed in the
enclosure.
The following diagram shows an example of the installation order for optional disks.
ETERNUS DX60 S2 Disk storage system User's Guide -Site Planning-
Type
16 1TB/7.2krpm × 2
17 1TB/7.2krpm × 6
18 1TB/7.2krpm × 6
19 1TB/7.2krpm × 6
20 1TB/7.2krpm × 1
2TB/7.2krpm × 2
21
2TB/7.2krpm × 6
22
3.5"
2TB/7.2krpm × 6
23 Nearline
SAS disk
2TB/7.2krpm × 6
24
2TB/7.2krpm × 1
25
3TB/7.2krpm × 2
26
3TB/7.2krpm × 6
27
3TB/7.2krpm × 6
28
3TB/7.2krpm × 6
29
3TB/7.2krpm × 1
30
Slot#8
Slot#4
Slot#0
Installation diagram for 3.5" disks
Copyright 2012 FUJITSU LIMITED
Disk capacity/quantity
Table 4.4. Then, install disks in the slots of a drive enclosure
Slot#9 Slot#10
Slot#5
Slot#6
Slot#1 Slot#2
59
RAID level
RAID1
RAID1+0
RAID5
RAID6
Hot spare
RAID1
RAID1+0
RAID5
RAID6
Hot spare
RAID1
RAID1+0
RAID5
RAID6
Hot spare
Slot#11
Slot#7
Slot#3
P3AM-5492-04ENZ0