Fujitsu PRIMERGY TX300 S6 Options Manual page 51

Processors
Mounting and locking the heat sink
Figure 24: Mounting and locking the heat sink
Ê Align the heat sink on the processor socket so that the side with the visible
copper heat pipes is pointing in the direction of the memory slots.
Ê Fold down the two heat sink retaining clips at the same time and lock the
heat sink by returning the heat sink retaining clips to their original position.
Ê Reinstall the fan carrier as described in the
on page 105.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page
TX300 S6
section "Installing the fan carrier"
105.
Options Guide
Replacing the processor
51