12
Using the Main Menu
7. (OPTIONAL) Use the Copy function to copy your settings to another or all connected
cameras. See 12.1.1 Copying Channel Settings to Another Channel, page 49 for de-
tails on using the copy function.
12.2.9 Configuring Recording Parameters
Configure basic video recording options.
To configure recording parameters:
1. Under Settings, click REC Para to open the REC Para tab.
2. Use the dropdown next to Channel to select a channel to set the recording parameters
for.
3. Select Enable to allow recording on the selected channel.
4. Use the dropdown next to Stream Mode to configure the recording mode. Select Du-
alStream to record using mainstream recording settings while using the substream for
remote viewing, or select MainStream to use mainstream recording only.
CAUTION
You must set the Stream Mode to DualStream in order to play back recordings using the FLIR Se-
cure mobile app. Live viewing will not be affected.
NOTE
To configure mainstream and substream settings, see 12.2.11 Configuring System Recording Quality
(Mainstream and Substream), page 60.
5. Select Enable from the dropdown next to Pre Record to enable pre-recording for mo-
tion events. To setup motion detection preferences, see 12.2.20 Configuring Motion
Detection Settings, page 71.
6. Click Save.
#LX400086; r. 1.0/39246/39246; en-US
58