Operation Instructions; Front Panel Controls - Fluke TRACKER 90100 Operator's Manual

Radiation measurement system

Table of Contents

Model 90100

Operators Manual

Gantry

Model

35300A

Detector

Cable to

35360A TRACKER Display

90 degrees

Gantry

270 degrees

Figure 2-5.

Setup for 90- and 270-Degree Angles (NOTE: Build-up not shown for clarity)

2.4 Operation Instructions

This section contains detailed instructions on the front panel operation of the Model 35360A TRACKER

Display. The 35360A TRACKER Display front panel keys and display are explained. Please note that

the display examples shown here correspond to a particular customization set-up. Other customization

set-ups will produce different results.

Figure 2-6 shows the front panel of the 35360A TRACKER Display. The front panel consists of control

buttons and a display. The following paragraphs describe the operation of each control button and the

corresponding display screens.

2-6

Gantry arm

Treatment

head

Treatment

table

Treatment table

To 35360A

TRACKER Display

Cable

Table of Contents