Operation; Customer Responsibilities - Craftsman 917.242440 Owner's Manual

OPERATION
Make sure all Bolts and Nuts are tight, Retainer Springs
are secure.
READ THE "RULES FOR SAFE OP-
ERATION" CAREFULLY BEFORE OP-
ERATING YOUR ELECTRIC ACTUA-
TOR.
.
2.
J
Ignition Switch must be "ON" to operate Electric
Actuator.
After you install LiftSwitch follow markingsalreadyon
dashboard.
.
If you hear a ratcheting sound, you know you are fully
raised or fully lowered. Release Switch promptly after
ratchetingbegins.
LIFT ATTACHMENT OUT OF THE
GROU ND WHEN TURNING CORNERS,
REVERSING OR TRANSPORTING.
J
CUSTOMER RESPONSABILITIES
LUBRICATION
.
2.
The Electric Actuator is lubricated for normal life. If
Actuator is disassembled for repair, upon reassembly
lubricate with high performance extreme pressure
lubricating grease.
Apply a light coat of grease to threaded areas and
Pivot Points.
THE ELECTRIC ACTUATOR IS
EQUIPPED WITH AN OVERLOAD CIR-
CUIT THAT WILL TRIP WHEN OVER-
LOADED.
UNIT WILL AUTOMATICALLY RESET
AFTER 10 SECONDS.
17