sTEp 4:
(sEE FIGurE 4)
•
Assemble a shoulder bolt, 1/2" washer and 3/8" lock
nut to the frame brace and slotted hole on each side
of the bumper.
FIGurE 4
TILT BuMpEr dOwN BEFOrE raIsING
TraCTOr hOOd:
(sEE FIGurE 6)
•
while pushing in lightly on top of bumper, pull latch
under front of bumper.
•
keep latch pulled out and pull down on bumper.
LOCk BuMpEr INTO up pOsITION:
FIGurE 6)
•
Push bumper up into position. Latch will lock bumper
into place.
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
3/8" LOCK NUT
1/2"
WASHER
SHOULDER
BOLT
OpEraTION
(sEE
sTEp 5:
(sEE FIGurE 5)
•
Fasten the frame braces to the tractor frame using
four 3/8-16 x 1" carriage bolts and 3/8" whizlock nuts.
NOTE: Only tractor frame shown for clarity.
3/8" WHIZLOCK NUT
FIGurE 5
LATCH
FIGurE 6
3/8-16 x 1"
CARRIAGE
BOLT
TRACTOR FRAME
5