ASSEMBLY FOR VERTICAL ENGINE MODELS
INSTALL PIVOT ARM ASSEMBLY
Raise link assembly until nylinersare in4inewith hole
in LH side oftractorframe. Insertpivotrodsupportwith
washerthroughnylinersinpivotarm, as shown.Loosely
assembly to hex bolt 3/8-16 x 718 and lock washer
through holein LH side offrame. Do not tightenat this
time.
Assemble flattened end of pivot rod supportto under-
side of pivot rod bracket usinghex bolt3/8-16 x 1-1/4,
flat washer and Iocknut and tighten securely. Now
tighten previouslyassembled 3/8-16 x 7/8 hex bolt.
318-16 X 718
LOCK
NYUNERS AND
HEX BOLT
WASHER
PIVOT ARM
FLAT
3/8-16 X 1-1/4
WASHER
HEX BOLT
VIEW FROM UNDER TRACTOR
3/8-16 X 7/8
LOCK
HEX BOLT
HOLE IN LH SIDE
OF TRACTOR
FLAT
PIVOT ROD BRACKET
NYLINERS AND
PIVOT ARM
ASSEMBLY
318-16 LOCKNUT
PIVOT ROD
SUPPORT
Fig. 14
12