2 - 1 Getting Started; Initial Setup; Setting The Date And Time; Setting Tone And Pulse Dialing Mode - Brother FAX-2440C User Manual

g started
Initial Setup
Setting the Date and Time
When the machine is not in use it will displaythe date and time. If you
set up the Station ID the date and time displayed by your machine
will be printed on every fax you send. If there is a power failure, you
may have to reset the date and time. No other settings will be
affected.
Press Menu/Set, O,
2.
[Initial Setup
]
Enter the last two digits of the year. 2
.
DaLe/Time
Press Menu/Set.
Enter two digits for the month.
Press Menu/Set.
(For example, enter 09 for September, or 10 for October.)
Enter two digits for the day.
Press Menu/Set. (For example, enter 06 for 6th.)
Enter the time in 24-Hour format.
Press Menu/Set (For example, enter 15:25 for 3:25 P.M.)
Press Stop/Exit.
The LCD now shows the date and time whenever the machine
is in Fax mode.
Setting Tone and Pulse dialing mode
Press Menu/Set, 0, 4.
Press • or • to select
Pulse
(or
Tone).
Press Menu/Set.
Initial Setup
]
4.Tone/Pulse
Press Stop/Exit.
2 - 1 GETTING STARTED